Français
Deutsch
Italiano
Español
Brown stoneware & porcelain engobe - EASP08
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips /
Firing range 980 - 1280°C
Brush application, soaking or spraying.
LUSTER AVENTURINE GLAZE UNLEADED E21017/73
Lustre crimson "Aventurine"
Ref : E21017/73
GLAZE WITH EFFECT E21017/71 LUSTER ORANGE AVENTURINE WITHOUT LEAD
Lustre orange "Aventurine"
Ref : E21017/71
D99 SUNSHINE YELLOW PIGMENT DYE
Sunshine yellow
Ref : D99
COLORS TO BE PAINTED D SERIES Our D series from Solargil is a range of very fine coloring oxides with flux incorporated in the formula.
Miscible with each other to vary the shades, they can be used under glaze or on enamel, and can also be used to color enamels: between 4 and 9% in a transparent base and between 6 and 15% in a white base.
Tips:
Firing temperature 950-1250°C
Formula: Zr-Si-Co-Ni
Marin blue D28
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing temperature: 950-1250°C
Formula: Co-Si-Al
Yellow D15
Colors to paint D Set.
These products are a range of are very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Advice :
Température : 950-1250°C
Formula: Zr-Si-Pr
MIRETTE SIMPLE STAINLESS STEEL ROUND WIRE 20 CM
Classical sculpture tool in stainless steel, for clay, ceramic, wax, etc... L. 20 cm - CT1116
Ochre - CS 218
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Cobalt blue - CS 214
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Purple - CS 204
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Black - CS 202
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
CONE ORTON TYPE - FUSEWATCH Box of 50
Ref : CONEBOITE
COLORANT LIQUIDE SANS PLOMB CD19 ROSE CLAIR
Rose clair
Réf : CD19
Gamme de couleurs sans plomb pour la décoration avec fondant incorporé dans la formule.
Ces couleurs sont miscibles entre elles sur et sous émail.
Formule: Cd-S-Se-Zr-Si
Température cuisson: 980-1280°C
COLOUR FREE LEAD CD18 BEIGE KAKI
Beige kaki- CD18
Without lead
Firing temperature: 980-1280°C
Formula: Al-Cr
COLOUR LEAD FREE CD12 BROWN
Brown- CD12
Without lead
Firing temperature: 980-1280°C
Formula: Cr-Fe-Zn
COLOUR LEAD FREE CD10 OCHRE
Ochre- CD10
Without lead
Firing temperature: 980-1050°C
Deep green CC07
Engobes range. Possibility to mix them together. Usable on raw pieces or bisquewares, for soaking or decoration.
Temperature of firing : 980-1000°C
Coefficient of expansion: 86
Free of lead
LITHIUM CARBONATE
Ref : CARLIT
Molar formula
CO3Li2
Molar mass : 73
Stainless steel glaze claws L. 300 mm spring loaded - C-300
ALUMINA BALL Ø 30MM LE KG
Alumina ball 30mm - BILALU30
Milling ball
Alumina ball 92% for cylindrical jar
Ask for 99.7 % or 99.9 % alumina
6262 Slate blue
Natural pigments have a lot of advantages: inalterability to ultraviolet rays, high covering power and can be mixed between them anf non toxics.
SHORT CUTTING TOOL 12 CM APPROX. UNIT
Short mirette, length approx. 120 mm with wooden handle
BRUSH SMALL GREY SHORT HAIR N°6
Brush "Petit gris" short hair N° 6
Blue "duck"cracked - 5939 (ex E31018/9 )
Opaque glaze without lead.
Temperature of firing 980°C
Glaze Turquoise green 5811
Advise :
Temperature of firing : 960-1020°C
Mentions :
Presence of lead. Use only for decorative production
Groupe III with lead
Clear turquoise green - 5785 crackle
Groupe III
Firing temperature 960-1020°C
GLAZE EFFECT OPAQUE 5654 LEATHER LIGHT GREEN
Light green leather
Ref : 5654
Coloured opaque glaze without lead
Temperature of firing : 960-1020°C
LIGHT LEATHER OPAC EFFECTS GLAZE 5652 / M
Light leather
Ref : 5652
Opaque glaze with effects without lead
Temperaure of firing : 960-1020°C
