Français
Deutsch
Italiano
Español
REFRACTORY PILLAR H 300 mm Diam.43 mm 1350°C
Pillars - Props
Temp 1350 ° C - H 300mm Ø 43mm
Fragile material, can not be sent by post.
Electronic Potter's wheel "LITTLE FROG" model TY16
Potter's wheel for pottery initiation.
Power 380 W in 220 Volt monophase (usual plug)
MIRETTE DOUBLE STAINLESS STEEL CUTTING TOOL L 200 MM - FR381
Professional cutting tool
POTASSIC FELDSPATH ICE10
Ref : FELDSICE10
Potassic feldspath ICE10
%Perte au feu 0.6
Celadon green stoneware & porcelain engobe - EASP09
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips /
Firing range 980 - 1280°C
Brush application, soaking or spraying.
DURCI'DUR® Red Classic Range - DDR10
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
CONE ORTON - SELF-HELDING FUSE WATCH BOX OF 25
Ref : CONEAUTOBOX
COLOUR FREE LEAD CD26 GREY GREENISH
Grey greenish - CD26
Without lead
Firing temperature: 980-1280°C
Formula: Zr-Si-Ni-Co
CARBORUNDUM 500 MICRONISE
CARBORA
Stem 1400°C maximum L 300x4 mm - 4000003000
Mini ribbon molding clay 11 cm - Set of 5 - 903
Transparent glaze - 5460
Lead-free shiny transparent enamel widely used for enamelling white majolica, for its transparency, brilliance and good color development.
It can be used for culinary ceramics since it is lead free.
Can be decorated both under and on the enamel.
Specially indicated for obtaining colored enamels.
The firing temperature varies between 980-1040°C.
Conical sponge on wooden handle - 035HM001
smaller diameter 20 mm
L. 89 mm
Fine natural sponge appearance.
White smooth earthenware - JASMIN.
Stoneware tone stone grog 30% 0,0-5 - GTP005
Wild stoneware, grès fauve chamotte 45% 1-3 mm - GRESAUVAGE
This clay, formulated from natural clay, is a special feature of SOLARGIL®.
Groleg
Stoneware cement grey grog 25% 0-0,5 mm - GCIMENT
Smooth white stoneware - FLAXEN00
White stoneware clay containing 3 to 4% cellulose fibre, smooth.
Gauge poste in cast aluminium with 2 arms rubber tip Ø 120 x H 370 mm - TRUSQ87
Arm 390 mm
Wheel Height Throwing Gauge
Glossy white enamel - PR 115
Composed of Frit.
High gloss Opaque White enamel, low expansion.
Can be used with excellent results on tiles or red earthenware as well as white majolica.
The firing temperature varies between 1000-1080ºC.
Kiln refractory round plates 1340 ° C max Ø 350 x 12 mm (3kg)
Fragile material, can not be sent by post.
PEPTAPON 5 Suspensive "tempered glaze"
Ref : PEP5
CERAMIC PIGMENT P28 GREEN APPLE
Stain Apple green P28
Mass colourings 1300°C. Pur colourings of the P range are used to color masses : Porcelain and white earthenware.
MOLOCHITE
Molochite 200
Calcined kaolin allows the introduction of alumina into glazes without affecting the rheology of the baths as with natural kaolins which are used more as suspensives.
It is kaolin calcined at high temperatures, as the chemical water, carbon dioxide and other volatile gases have been eliminated, thus obtaining the purest form of Kaolin.
It is used in white clay, porcelain and glazes.
CUTTING TOOL L 220 MM N°15
Simple ribbon tools L. 220 mm N°15 - MIR73
Simple ribbon tools L. 220 mm N°16 - MIR50
Double ribbon tools L. 265 mm N°13 - MIR48
Simple ribbon tools L. 220 mm N°8 - MIR46
Pigment hématite "6253" - HEM
Hematit is extracted from our quarry of Saint Amand en Puisaye (Burgundy). It's a natural iron ochre used into painting, cements and for coloring clays, glazes.
GLAZE STONEWARE/PORCELAIN GEESP05 ANTHRACITE JASPE WITHOUT LEAD
Anthracite jaspe GEESP05
GROUPE I
Firing temperature: 1250-1300°C
Transparent glaze ES6010
Glazes for stoneware and porcelains
Temperature of firing : 1250-1300°C
Groupe I
Without lead
Red stoneware & porcelain engobe - EASP06
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips /
Firing range 980 - 1280°C
Brush application, soaking or spraying.
Stoneware & porcelain engobe base to color - EASP00
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips:
Firing range 980 - 1280°C
Brush application, soaking or spraying.
