Français
Deutsch
Italiano
Español
Glittery antracite EESP03
GROUPE I
Firing temperature: 980°C
Lead free parrot green cadmium enamel - EECS 09
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free orange cadmium enamel - EECS 02
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
PROTECTION SHIELD FOR RADIANT HEAT MAX. 1390°C
Protection shield for radiant heat up to1390°C - ECRAN
SLIP GRES & PORCELAIN EASP04 MAKE-UP
'Make-up' stoneware & porcelain engobe - EASP04
POWDER
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips /
Firing range 980 - 1280°C
Brush application, soaking or spraying.
Transparent glaze Emerald green E89283
Advice :
Temperature of firing : 960-1040°C
Mentions :
GROUPE III
Presence of lead. Use only for decorative production
Eggplant transparent enamel - E68005
Range of colored transparent enamels.
They can be applied on white or red engobed paste.
Firing temperature 980 - 1020°C.
GLAZE WITH EFFECT E21017/82 LUSTER ORANGE AVENTURINE WITHOUT LEAD
Lustre orange "Aventurine"
Ref : E21017/82
BEIGE LUSTER AVENTURINE GLAZE UNLEADED E21017/81
Lustre "Aventurine"
Ref : E21017/81
BLACK LUSTER AVENTURINE GLAZE UNLEADED E21017/69
Lustre black "Aventurine"
Ref : E21017/69
DIAMOND ADHESIVE FOR 350MM 125µ POTTER'S WHEEL DISC
Ref : DISQDIAMTOURECH
Decor flux5 melting for serie P - DFLUX5
GROUPE II
Firing temperature: 900-950°C
Coefficient of expansion: 71
DENSIMETER 1600-1700 G / L
Precision densimeter - DENS16/17
Range 1600 - 1700 g / l
DENSIMETER 1500-1600 G / L
Precision densimeter - DENS15/16
Range 1500 - 1600 g / l
DURCI'DUR® Red Classic Range - DDR5
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
Green persian D96
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1050°C
Formula: Co-Pr
Copper ochre D72
COLOR D72 COPPER OCHRE
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Zr-Si-Al-Zn-Cr-Fe
White D56
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing temperature: 950-1200°C
Formula: Zr-Si-Al
Deep green D52
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing temperature: 950-1250°C
Formula: Cr-Al
Red D393
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing température : 950-1250°C
Formula: Zr-Si-Cd-Se
Deep grey D25
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing température 950-1250°C
Formula: Sn-Sb-Zr-V
Orange - D211
Colouring oxide range with unlead fondant incorporated in the formula.
Possibility to mix those colours and to use them on or under the glaze.
Firing température 980-1020°C
Formula: Zr-Si-Cd-Pr-S-Se
Dark red D08
Colors to paint D Set. These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing température 950-1200°C
Formula: Sn-Si-Ca-Cr
