Français
PSL porcelain very white and very fine - PSL
Red stoneware Brasil grog 40% 0-0,2 mm - BRASIL002
LARGE MIRETTES SHORT LENGTH CUTTING WIRE H. 20 CM N ° 31
Coiled ribbon tools N°1 H 20 cm -
Ref : SC8
Complet kit Including, the probe type thermometer + K (1200 ° C) 250mm long + 3m compensating cable.
This kit comes fully assembled. Without batteries
Brown humus jaspé GEESP000/18
GROUPE I
Firing temperature 980-1280°C
AQUAMARINE BLUE TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE408
Blue aquamarine
Ref : GE408
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
DURCI'DUR® Red Classic Range - DDR1.5
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
DURCI'DUR® White Classic Range - DDB1.5
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
COLOUR LEAD FREE CD11 BLACK
Black- CD11
Without lead
Firing temperature: 980-1280°C
Formula: Co-Fe-Cr-Mn
COLOUR LEAD FREE CD03 BLUE TURQUOISE
Turquoise- CD03
Without lead
Firing temperature: 980-1280°C
Formula: Zr-V-Si
CARBORUNDUM 500 MICRONISE
CARBORA
GLAZE FOR STONEWARE 010111 BRIGHT BROWN
LIQUID GLAZE ETSP01L TRANSPARENT BRIGHT WITHOUTLEAD 250GR
Transparent liquid glaze - ETSP01L
250GR
Special white clay Raku grog 40% 0-0.5 mm - RAKUMITSU005
Purple coloured porcelain - PVT2
Smooth porcelain.
For throwing, modeling and jewelry.
12 colour.
Orange coloured porcelain - PNT2
Smooth porcelain.
For throwing, modeling and jewelry.
12 colour.
Kiln refractory round plates 1340 ° C max Ø 350 x 12 mm (3kg)
Fragile material, can not be sent by post.
CERAMIC PIGMENT P33 GREEN CELADON
celadon green P33
P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.
MOLOCHITE
Molochite 200
Raw Materials Molochite 200 (Very Fine)
Calcined kaolin allows the introduction of alumina into glazes without affecting the rheology of the baths as with natural kaolins which are used more as suspensives.
It is kaolin calcined at high temperatures, as the chemical water, carbon dioxide and other volatile gases have been eliminated, thus obtaining the purest form of Kaolin.
It is used in white clay, porcelain and glazes.
WIRE RESISTANCE KANTHAL 3 MM FOR 1350°C THE METER
Ref : FILKAN3
Kanthal resistance wire Ø 3 mm
3 mm - price per meter
Ability to kg = 20 ml/kg
Hard stainless steel palette drop of water 69 x 36 mm - EST311R
Hard stainless steel palette half-moon 120 x 50 mm - EST305R
LIQUID ENGOBE FOR STONEWARE AND PORCELAIN EASP06L RED 250GR
Collection suitable for single-firing and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips /
Firing range 980 - 1280°C
Brush application, soaking or spraying.
Mini ribbon molding clay 11 cm - Set of 5 - 903
Transparent glaze - 5460
Lead-free shiny transparent enamel widely used for enamelling white majolica, for its transparency, brilliance and good color development.
It can be used for culinary ceramics since it is lead free.
Can be decorated both under and on the enamel.
Specially indicated for obtaining colored enamels.
The firing temperature varies between 980-1040°C.
Glaze Bright transparent 0302
Temperature of firing : 1200-1270°C
Groupe I
Yellow mustarde 010587 glaze
GROUPE I
Firing temperature: 1250-1300°C
Beige fire refractory stoneware for culinary use grog 30% 0-1 - GM76
Clay intented to withstand thermal shocks including direct flame (if fired at 1250°C minimum).
Adaptable to all production techniques.
Colour white-beige in oxidation and grey in reduction.
Red stoneware Brasil grog 40% 0-0,2 mm - BRASIL002
Groged
