Français
STAIN P189 RED
Red P189
Ceramic pigment
P set colouring oxides lik Pur.
RED BROWN PIGMENT P161
Red brown P161
Ceramic pigment
P set colouring oxides lik Pur.
YELLOW PIGMENT P125
Yellow P125 stain
Ceramic pigments
LAVENDER BLUE PIGMENT P12
lavender blue P12
P set colouring oxides lik Pur.
Dark red ochre natural pigment "6205" - OROF
Pigment from mineral origin.
These are clays or rock which are finely grinded (ochres, clay, natural oxides).
They have a highly resistance to the light (inaltérability to ultraviolets rays), they also are non toxics.
Moreover, they have a high covering power and can be mixed between them.
Monocolle V - Résine vinylique - Colle liquide
DOUBLE RIBBON TOOL ROUND WIRE 16 CM UNIT
Double ribbon tool 16 cm - MIRFR
Replacement blade for scraper 40 x 60 mm - KY104A
Shred
Ceramics pastel in the form of a stick without lead.
18 stick plain colours
KAOLYNE® pearl white liquid 1 L - KAONB1L
WATER GREEN TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE406
Water green
Ref : GE406
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
OUTIL SCULPTURE ACIER INOX 180 MM
Réf : FRI305
Outil acier inox de Longueur. 18 cm
Outil en acier inox fabriqué à la main, extrémités brillantes et polies.
1 Coté feuille de fougère et 1 coté spatule
Cet outil de sculpture ou ébauchoir sera parfait pour modeler le plâtre et l’argile et réaliser des effets (sgraffito par exemple).
Professionnal cutting tols
Ref : FR378
Soft thoothed stainless steel palette water drop 71 x 39 mm - EST312S
scraper
Soft stainless steel palette half-moon 190 x 35 mm - EST307S
Hard stainless steel palette half-oval 100 x 51 mm - EST303R
Shiny white - ES797
Temperature of firing : 950-1050°C
Coeff dilat 25-300°C: 62
Groupe I
Without lead
Transparent glaze cracked ES6031
Glazes for stoneware and porcelains
Temperature of firing : 1250-1300°C
Groupe I
Without lead
Cadmium intense green glaze ES261
With lead
Firing temperature : 950-1050°C
Dark blue - ES244
Temperature of firing : 950-1050°C
Groupe III
With lead
Liquid orange engobe ready for use EGM58/002
Firing temperature : 980-990°C°C
Without lead
WHITE LIQUID ENGOBE UNLEADED EGM52/020
Liquid white engobe ready for use
Speckled blue EESP26L 250gr
Liquid glaze without lead
GROUPE I
Firing temperature: 980°C
Lead free ink black cadmium enamel - EECS 13
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free avocado green cadmium enamel - EECS 10
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Sky blue stoneware & porcelain engobe - EASP13
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips /
Firing range 980 - 1280°C
Brush application, soaking or spraying.
