Français
Deutsch
Italiano
Español
ENGOBE GRES & PORCELAIN EASP12 AZURE BLUE
Azure blue stoneware & porcelain engobe - EASP12
Powder
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips :
Firing range 980 - 1280°C
Brush application, soaking or spraying.
Brown stoneware & porcelain engobe - EASP08
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips /
Firing range 980 - 1280°C
Brush application, soaking or spraying.
LUSTER AVENTURINE GLAZE UNLEADED E21017/73
Lustre crimson "Aventurine"
Ref : E21017/73
DOLAFLUX B is suitable for the deflocculation of most silicate ceramic raw materials
DURCI'DUR® Anise green Classic Range - DDV1.5
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
White opaque D60
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Zr-Ce-Si
Marin blue D28
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing temperature: 950-1250°C
Formula: Co-Si-Al
Yellow D15
Colors to paint D Set.
These products are a range of are very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Advice :
Température : 950-1250°C
Formula: Zr-Si-Pr
MIRETTE SIMPLE STAINLESS STEEL ROUND WIRE 20 CM
Classical sculpture tool in stainless steel, for clay, ceramic, wax, etc... L. 20 cm - CT1116
Opaque orange cadmium enamel - CS 220
For the enameling of ceramic pieces on white and red clay.
Recommended firing temperature, between 960-980ºC.
Ochre - CS 218
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Cobalt blue - CS 214
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Purple - CS 204
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Black - CS 202
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
CONE ORTON TYPE - FUSEWATCH Box of 50
Ref : CONEBOITE
COLORANT LIQUIDE SANS PLOMB CD19 ROSE CLAIR
Rose clair
Réf : CD19
Gamme de couleurs sans plomb pour la décoration avec fondant incorporé dans la formule.
Ces couleurs sont miscibles entre elles sur et sous émail.
Formule: Cd-S-Se-Zr-Si
Température cuisson: 980-1280°C
COLOUR FREE LEAD CD18 BEIGE KAKI
Beige kaki- CD18
Without lead
Firing temperature: 980-1280°C
Formula: Al-Cr
COLOUR LEAD FREE CD12 BROWN
Brown- CD12
Without lead
Firing temperature: 980-1280°C
Formula: Cr-Fe-Zn
COLOUR LEAD FREE CD10 OCHRE
Ochre- CD10
Without lead
Firing temperature: 980-1050°C
Deep green CC07
Engobes range. Possibility to mix them together. Usable on raw pieces or bisquewares, for soaking or decoration.
Temperature of firing : 980-1000°C
Coefficient of expansion: 86
Free of lead
LITHIUM CARBONATE
Ref : CARLIT
Molar formula
CO3Li2
Molar mass : 73
Stainless steel glaze claws L. 300 mm spring loaded - C-300
ALUMINA BALL Ø 30MM LE KG
Alumina ball 30mm - BILALU30
Milling ball
Alumina ball 92% for cylindrical jar
Ask for 99.7 % or 99.9 % alumina
6262 Slate blue
Natural pigments have a lot of advantages: inalterability to ultraviolet rays, high covering power and can be mixed between them anf non toxics.
SHORT CUTTING TOOL 12 CM APPROX. UNIT
Short mirette, length approx. 120 mm with wooden handle
BRUSH SMALL GREY SHORT HAIR N°6
Brush "Petit gris" short hair N° 6
Blue "duck"cracked - 5939 (ex E31018/9 )
Opaque glaze without lead.
Temperature of firing 980°C
Red grenadine cracked - 5932 (ex E31018/2 )
Opaque glaze without lead.
Temperature of firing 980°C
Turquoise blue 5813
Cracked bright transparent glaze
Advice:
Temperature of firing : 960.-1020°C
Mentions :
Presence of lead. Use only for decorative production
Glaze Turquoise green 5811
Advise :
Temperature of firing : 960-1020°C
Mentions :
Presence of lead. Use only for decorative production
Groupe III with lead
Clear turquoise green - 5785 crackle
Groupe III
Firing temperature 960-1020°C
GLAZE EFFECT OPAQUE 5654 LEATHER LIGHT GREEN
Light green leather
Ref : 5654
Coloured opaque glaze without lead
Temperature of firing : 960-1020°C
LIGHT LEATHER OPAC EFFECTS GLAZE 5652 / M
Light leather
Ref : 5652
Opaque glaze with effects without lead
Temperaure of firing : 960-1020°C
GLAZE EFFECT OPAQUE 5628NE LEATHER BROWN
Brown leather
Ref : 5628NE
Opaque glaze with effects
Without lead
Temperature of firing : 960-1020°C
Green marine transparent enamel - 5546
Range of colored transparent enamels.
They can be applied on white or red engobed paste.
Firing temperature 980 - 1020°C.
Open cutter large model diameter 12 mm - 532
Alkaline base for crystallization - 3110 (FR 5)
Alkaline lead-free enamel with high temperature range.
Composed of frit.
Used in the production of crystallizations at high temperature.
Temperature range 1000-1300°C.
Almond green glaze 263/145
Plombleux
Cooking temperature: 950-1050 ° C
Brush "Oreille de Boeuf" Tracer N°10
Dark brown Ox hair, hair protector.
Ferrule : Seamless nickel.
Handle : Short light brown Albata (handle are growing in lenght)
Diameter : 6.9 mm
Lenght : 25 mm
Ref : 18000 - 1431010
Bright transparent cristalized 07004 glaze
Temperature of firing : 12501280°C
Groupe I
Mauve 010173
Glazes for stonewares and porcelains.
Temperature of firing : 1250-1320°C
SOLARGIL FC300 SILENT ELECTRONIC POTTER'S WHEEL
Silent model
Ref : FC300
UNDERGLAZE LIQUID ENSPDINL BRAUN BLACK 250GR
Brown black ENSPDINL
Without lead Groupe 1
250gr
Firing temperature: 980°C-1050°C
UNDERGLAZE LIQUID ENSP26L PURPLE 250GR
Purple ENSP26L UNDERGLAZE LIQUID
Without Lead GI
250gr
UNDERGLAZE LIQUID ENSP14L BROWN 250GR
Brown ENSP14L underglaze liquid
Without lead GI
250gr
LIQUID GLAZE EOSP26L BLACK OPAQUE WITHOUT LEAD 250GR
Black EOSP26L
GROUPE I without lead
Firing temperature: 980°C
250gr
LIQUID GLAZE EMSP17L DEEP GREY MATTE WITHOUT LEAD 250GR
Grey- EMSP17L
GI without lead
250gr
Firing temperature: 980°C
LIQUID GLAZE EOSP09L BLUE COBALT OPAQUE WITHOUTLEAD 250gr
Cobalt - EOSP09L
Groupe I leadfree
Firing temperature: 980 °C
250gr
LIQUID GLAZE EOSP05L YELLOW OPAQUE WITHOUTLEAD 250GR
Yellow - EOSP05L
GROUPE I free lead
Firing temperature: 980°C
250gr
LIQUID ENGOBE ENSP16LL CARAMEL 1KG
Caramel ENSP16LL
Without lead Groupe 1
1KG
ENGOBE LIQUIDE ENSP19L OCRE 250GR
Ocre ENSP19L
Engobe liquide prêt à l'emploi
Conditionnement : 250gr
Groupe I
Cuisson 980°C-1050°C
ENGOBE LIQUID ENSP10L CARMINE 250GR
Color Carmine
Ref : ENSP10L
250GR
Without lead Group 1
Firing temperature: 980°C-1050°C
LIQUID GLAZE EOSP01LL WHITE ANTIC OPAQUE WITHOUTLEAD 1KG
"Antique"White - EOSP01LL
GROUP I without lead
1KG
Firing temperature: 980°C
ENGOBE LIQUID ENSP00LL WHITE 1KG
White ENSP00 underglaze
GI Without lead
1KG
UNDERGLAZE LIQUID ENSP28L YELLOW ORANGE 250GR
Yellow orange ENSP28L liquid underglaze
Without lead Groupe 1
250GR
Alkaline transparent gloss powder enamel lead-free - PR 300
Composed of Fritte.
For enamelling of white earthenware.
We can decorate under and on enamel.
Obtaining coloured enamels by adding dyes from the "P" series.
Firing temperature between 1050 and 1180ºC.
Black ETSP23
GROUPE I
Firing temperature: 980-1050°C
Grey ETSP22
Groupe I
Firing temperature: 980-1050°C
" Carmine " - ETSP10
GROUPE I
Firing temperature: 980°C-1050°C
Red - ETSP08
GROUPE I
Firing temperature: 980°C-1050°C
LIQUID GLAZE EOSP03 AUBERGINE OPAQUE WITHOUTLEAD
Aubergine / Eggplant - EOSP03
GROUPE I
Firing temperature: 980°C
POWDER GLAZE EOSP21 PINK OPAQUE WITHOUT LEAD
PINK - EOSP21
GROUPE I whitout lead
Firing temperature: 980°C
Blue-EOSP02
GROUPE I
Firing temperature: 980°C
ENGOBE ENSP23 PINK UNDERGLAZE
Rose ENSP23
In powder
POWDER ENGOBE ENSP16 CARAMEL
Caramel ENSP16
UNDERGLAZE POWDER ENSP07 MAUVE
Mauve ENSP07 underglaze liquid
UNDERGLAZE ENGOBE POWDER ENSP03 BLACK
Black ENSP03
DOUBLE RIBBON AND WIRE TOOL SET H.20 CM
Coiled ribbon tools set 7 pcs 20 cm
Ref : C14
Green mint XP3260/T (Ex E31009/60 )
Free of lead
GROUPE I
Temperature of firing : 930-1050°C
Beige chamois XP3255/T (Ex E31009/55)
Free of lead
GROUPE I
Temperature of firing : 930-1050°C
Yellow canary XP3237/T (Ex E31009/37)
Free of lead
GROUPE I
Temperature of firing : 930-1050°C
Bright oranged yellow XP3050/T
GROUPE I
Free of lead
Temperature of firing : 930-1050°C
Coefficient of expansion: 55
