Français
Deutsch
Italiano
Español
Deep grey D25
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing température 950-1250°C
Formula: Sn-Sb-Zr-V
Cobalt blue D202
Colouring oxide range with unlead fondant incorporated in the formula.
Possibility to mix those colours and to use them on or under the glaze.
Firing temperature: 980-1020°C
Fomula: Co-Si
COLOR D05 BROWN CHOCOLATE
Chocolate brown D05
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing Température 950-1250°C
Formula: Zn-Fe-Cr-Al
Red brown D04
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing Température 950-1250°C
Formula: Zn-Al-Cr-Fe
Deep yellow ochre D01
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes :between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Zr-Si-Fe-Pr-Zn
Forged steel modelling double-end tool stainless steel for clay 17.8 cm - CULT1424
Forged steel modelling tool iron L. 17.5 cm - CULT1412
Classical sculpture tool for clay, wax, ceramic, etc... L. 25 cm - CT1114
Matt light pink opaque enamel - CSM 118
This is a collection of matt colored enamels prepared for the "cuerda seca" technique.
CSM-100 series matt enamels for cuerda seca can be used for white and red paste.
The recommended firing temperature is 980ºC-1000ºC.
Matt black opaque enamel - CSM 117
This is a collection of matt colored enamels prepared for the "cuerda seca" technique.
CSM-100 series matt enamels for cuerda seca can be used for white and red paste.
The recommended firing temperature is 980ºC-1000ºC.
Matt water green opaque enamel - CSM 112
This is a collection of matt colored enamels prepared for the "cuerda seca" technique.
CSM-100 series matt enamels for cuerda seca can be used for white and red paste.
The recommended firing temperature is 980ºC-1000ºC.
Opaque glaze with effect Chattered cream CS6040
Advice :
Temperature of firing : 980-1020°C
Dilation coeff 25-300°C : 62
Mentions :
Presence of lead. Possibility to use for alimentary production under conditions
