Français
Deutsch
Italiano
Español
Monocolle V - Résine vinylique - Colle liquide
DOUBLE RIBBON TOOL ROUND WIRE 16 CM UNIT
Double ribbon tool 16 cm - MIRFR
Replacement blade for scraper 40 x 60 mm - KY104A
Shred
KAOLYNE® pearl white liquid 1 L - KAONB1L
WATER GREEN TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE406
Water green
Ref : GE406
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
OUTIL SCULPTURE ACIER INOX 180 MM
Réf : FRI305
Outil acier inox de Longueur. 18 cm
Outil en acier inox fabriqué à la main, extrémités brillantes et polies.
1 Coté feuille de fougère et 1 coté spatule
Cet outil de sculpture ou ébauchoir sera parfait pour modeler le plâtre et l’argile et réaliser des effets (sgraffito par exemple).
STAINLESS STEEL TOOLS FRI116 DOUBLE NEEDLE AND BALL L 150 MM
Double stainless steel tool
Needle for detail and fine work
Round tip diameter 5 mm
Total length 150 mm
Ref : FRI116
Calcareous Silico Alcalino frit (SIO2 NAKO) - FR4
Professionnal cutting tols
Ref : FR378
Soft thoothed stainless steel palette water drop 71 x 39 mm - EST312S
scraper
Soft stainless steel palette half-moon 190 x 35 mm - EST307S
Shiny white - ES797
Temperature of firing : 950-1050°C
Coeff dilat 25-300°C: 62
Groupe I
Without lead
Transparent glaze cracked ES6031
Glazes for stoneware and porcelains
Temperature of firing : 1250-1300°C
Groupe I
Without lead
Cadmium intense green glaze ES261
With lead
Firing temperature : 950-1050°C
Liquid orange engobe ready for use EGM58/002
Firing temperature : 980-990°C°C
Without lead
WHITE LIQUID ENGOBE UNLEADED EGM52/020
Liquid white engobe ready for use
Undercoat EGM20
Temperature of firing : 940-1080°C
Free of lead
LIQUID ENAMEL WITH EESP31 EFFECT SPOT WHITE
The EESP series is liquid, in jars.
Temperature: 980-1080°C
Speckled blue EESP26L 250gr
Liquid glaze without lead
GROUPE I
Firing temperature: 980°C
Lead free ink black cadmium enamel - EECS 13
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free avocado green cadmium enamel - EECS 10
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
