Français
Deutsch
Italiano
Español
Cobalt blue D202
Colouring oxide range with unlead fondant incorporated in the formula.
Possibility to mix those colours and to use them on or under the glaze.
Firing temperature: 980-1020°C
Fomula: Co-Si
COLOR D05 BROWN CHOCOLATE
Chocolate brown D05
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing Température 950-1250°C
Formula: Zn-Fe-Cr-Al
Red brown D04
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing Température 950-1250°C
Formula: Zn-Al-Cr-Fe
Deep yellow ochre D01
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes :between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Zr-Si-Fe-Pr-Zn
Forged steel modelling double-end tool stainless steel for clay 17.8 cm - CULT1424
Forged steel modelling tool iron L. 17.5 cm - CULT1412
Classical sculpture tool for clay, wax, ceramic, etc... L. 25 cm - CT1114
Matt light pink opaque enamel - CSM 118
This is a collection of matt colored enamels prepared for the "cuerda seca" technique.
CSM-100 series matt enamels for cuerda seca can be used for white and red paste.
The recommended firing temperature is 980ºC-1000ºC.
Matt black opaque enamel - CSM 117
This is a collection of matt colored enamels prepared for the "cuerda seca" technique.
CSM-100 series matt enamels for cuerda seca can be used for white and red paste.
The recommended firing temperature is 980ºC-1000ºC.
Matt water green opaque enamel - CSM 112
This is a collection of matt colored enamels prepared for the "cuerda seca" technique.
CSM-100 series matt enamels for cuerda seca can be used for white and red paste.
The recommended firing temperature is 980ºC-1000ºC.
Opaque glaze with effect Chattered cream CS6040
Advice :
Temperature of firing : 980-1020°C
Dilation coeff 25-300°C : 62
Mentions :
Presence of lead. Possibility to use for alimentary production under conditions
Blue green CS476
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Green CS446
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Grey CS431
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing Temperature : 980C
GROUPE II
CUERDA SECA
Lilac CS423
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Opaque orange cadmium enamel - CS 220
For the enameling of ceramic pieces on white and red clay.
Recommended firing temperature, between 960-980ºC.
White - CS 215
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Dark brown - CS 213
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Light brown - CS 212
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Blue - CS 206
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Light brown - CS 205
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Eggplant - CS 201
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
SCALE WEIGHING BAG ENAMEL , CLAY 35 KG / 10 G
Maximum range 35 kg / Accuracy 10 g - CPWPL35
SPECIAL RED GLUE FOR DOOR GASKET 310 ML TUBE
Tube of 310 ml. High temperature maxi 300°C.
Application with a spray gun.
Ideal for braiding for insulation of furnace or boiler doors.
High temperature resistant glue up to 300°C maximum.
Ref : COLJOINT
