Français
Deutsch
Italiano
Español
Transparent without lead glaze - PR02
FiringTemperature : 1100-1200°C
Coefficient of expansion: 64
GROUPE I : Enamel without lead
PWDC MOTOR SUPPORT RUBBER PAD
Ref : PLOTCAOUTPW
BROWN CHOCOLATE PIGMENT P51 (REMPLACE P31)
Brown P51
P set colouring oxides lik Pur.
GREY PIGMENT P30
Ceramic pigment Grey P30
P set colouring oxides lik Pur.
Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.
COLOURING PIGMENT P23 GREEN BLUE
P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.
PIGMENT P216 GRASS GREEN
Ceramic pigment Grass green P216
P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.
STAIN P189 RED
Red P189
Ceramic pigment
P set colouring oxides lik Pur.
RED OCHRE PIGMENT P17
Ceramic pigment Red ochre P17
P set colouring oxides lik Pur.
Dark red ochre natural pigment "6205" - OROF
Pigment from mineral origin.
These are clays or rock which are finely grinded (ochres, clay, natural oxides).
They have a highly resistance to the light (inaltérability to ultraviolets rays), they also are non toxics.
Moreover, they have a high covering power and can be mixed between them.
BLUE LUSTRE GLAZE N3303
Blue lustre N3303
Monocolle V - Résine vinylique - Colle liquide
DOUBLE RIBBON TOOL ROUND WIRE 16 CM UNIT
Double ribbon tool 16 cm - MIRFR
Replacement blade for scraper 40 x 60 mm - KY104A
Shred
Ceramics pastel in the form of a stick without lead.
18 stick plain colours
KAOLYNE® pearl white liquid 1 L - KAONB1L
WATER GREEN TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE406
Water green
Ref : GE406
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
OUTIL SCULPTURE ACIER INOX 180 MM
Réf : FRI305
Outil acier inox de Longueur. 18 cm
Outil en acier inox fabriqué à la main, extrémités brillantes et polies.
1 Coté feuille de fougère et 1 coté spatule
Cet outil de sculpture ou ébauchoir sera parfait pour modeler le plâtre et l’argile et réaliser des effets (sgraffito par exemple).
STAINLESS STEEL TOOLS FRI116 DOUBLE NEEDLE AND BALL L 150 MM
Double stainless steel tool
Needle for detail and fine work
Round tip diameter 5 mm
Total length 150 mm
Ref : FRI116
Calcareous Silico Alcalino frit (SIO2 NAKO) - FR4
Professionnal cutting tols
Ref : FR378
Soft thoothed stainless steel palette water drop 71 x 39 mm - EST312S
scraper
Soft stainless steel palette half-moon 190 x 35 mm - EST307S
Shiny white - ES797
Temperature of firing : 950-1050°C
Coeff dilat 25-300°C: 62
Groupe I
Without lead
Transparent glaze cracked ES6031
Glazes for stoneware and porcelains
Temperature of firing : 1250-1300°C
Groupe I
Without lead
Cadmium intense green glaze ES261
With lead
Firing temperature : 950-1050°C
LIGHT GREEN LIQUID ENGOBE UNLEADED EGM55/004
Liquid green engobe ready for use
Firing temperature : 980-990°C°C
WHITE LIQUID ENGOBE UNLEADED EGM52/020
Liquid white engobe ready for use
Undercoat EGM20
Temperature of firing : 940-1080°C
Free of lead
LIQUID ENAMEL WITH EESP31 EFFECT SPOT WHITE
The EESP series is liquid, in jars.
Temperature: 980-1080°C
Speckled blue EESP26L 250gr
Liquid glaze without lead
GROUPE I
Firing temperature: 980°C
Lead free ink black cadmium enamel - EECS 13
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free avocado green cadmium enamel - EECS 10
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Sky blue stoneware & porcelain engobe - EASP13
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips /
Firing range 980 - 1280°C
Brush application, soaking or spraying.
Chrome green stoneware & porcelain engobe - EASP10
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips /
Firing range 980 - 1280°C
Brush application, soaking or spraying.
Luster crimson "Aventurine"- E21017/51
Opaque glaze with effects
Without lead
Temperaure of firing : 980°C
DURCI'DUR® Golden yellow Classic Range - DDJ1.5
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
DURCI'DUR® Lavander blue Classic Range - DDBL1.5
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
Belt for PW2 POTTER'S WHEEL - COURROIEPW2
Friction rubber for PW-2 lathe.
Ref : COURROIEPW2
IRON CHROMATE
Ref : CHRFER
Iron chromate
Molar formula:
FeCr2O4
Molar mass: 172,00
COLOUR FREE LEAD CD17 PURPLE AUBERGINE
Purple aubergine- CD17
Without lead
Firing temperature: 980-1280°C
Formula: Cr-Sn
COLORANT LIQUIDE SANS PLOMB CD15 VERT MOYEN 100GR
Vert moyen
Réf : CD15
Gamme de couleurs sans plomb pour la décoration avec fondant incorporé dans la formule.
Ces couleurs sont miscibles entre elles sur et sous émail.
Formule: Zr-Pr-V-Si
Température cuisson: 980-1280°C
COLOUR LEAD FREE CD09 BROWN
Dark brown- CD09
Without lead
Firing temperature: 980-1280°C
Formula: Cr-Fe-Zn
COLOUR LEAD FREE CD05 WHITE
White- CD05
Without lead
Firing temperature: 980-1280°C
Formula: Si-Zr
Orange CC04
Engobes range. Possibility to mix them together. Usable on raw pieces or bisquewares, for soaking or decoration.
Temperature of firing : 980-1000°C
Free of lead
SMALL STAINLESS STEEL SHEATHED CABLE IN 0.7 MM - PER M
Ref : CABLEINOX
Glaze claws steel with spring-loaded - C-65
DENSE REFRACTORY BRICK FOR CERAMIC USE 1400°C MAX
1400 ° C for 40/45% alumina 220x110x60mm
Maximum temperature 1400 ° C
Weight: 3.12 kg / U
Carbide stick for polishing cutting edges of enamel - BATCAR
Abrasive stone for stoneware and porcelain pieces.
22 x 50 x 200 mm
Used for cleaning up stilt marks and bisqueware.
With this Stone, you can remove unsighly lines and marks left after firing within seconds.
ROD REFRACTORY STAINLESS STEEL 1200°C L 150 x 4 MM
Bar L 150 x 4 mm for 1200°C max
REFRACTORY STAINLESS STEEL 1200 ° C
bar length 150 mm x diameter 4 mm.
Rod 1200 ° C maximum beyond a slight deformation appears
Ideal for baking beads and ceramic jewelry
REFRACTORY STAINLESS STEEL 1200°C L 150 x 2 MM FOR LIGHT OBJECT
Bar L 150x2 mm. For each light
bar length 150 mm x diameter 2 mm.
Rod 1200 ° C maximum beyond a slight deformation appears
Ideal for baking beads and ceramic jewelry
Stainless steel tip rectangular wheel tool wooden handle n°19 - 61
Brush "Oreille de Boeuf short hair" N° 8
Dark brown Ox hair, hair protector
Ref : 5800 - 108108
Diameter : 5.4 mm
Visible lenght : 22 mm
Clear turquoise green - 5785 crackle
Groupe III
Firing temperature 960-1020°C
Glaze Beige 5723
Transparent glaze without lead
Advice :
Temperature of firing : 980-1050°C
Mentions :
GROUPE I
Free of lead
Red transparent enamel - 5658
Range of colored transparent enamels.
They can be applied on white or red engobed paste.
Firing temperature 980 - 1020°C.
Black 5410 opaque
Coloured bright opaque glazes usable on red or white clay.
Temperature of firing 960-1020°C
Groupe II with lead
Advice :
Coeff dilat 25-300°C: 66
Hole cutter large model Ø 22 mm - 535
Hole Cutter Round
Atomizer / mouth sprayer without tank - 50
Modelling clay tool 16 cm set of 38 pieces -20
Orange langoustine marbled 010590 (ex E-23010/70)
Glazes for stonewares and porcelains.
Temperature of firing : 1250-1300°C
Yellow banana jaspe 010585
GROUPE I
Firing temperature: 1250-1300°C
Red "purple" 010577 ( Ex E-23010/84)
GROUPE I
Firing temperature: 1250-1320°C
Red crimson jaspe 010574 (ex E23010/67)
GROUPE I
Firing temperature: 1250-1300°C
Green "olive" marbled 010572
GROUPE I
Firing temperature: 1250-1300°C
Undercoat for stoneware 0100
Temperature of firing : 1260-1300°C
Coefficient of expansion: 56
Free of lead
SILENT ELECTRONIC POTTER'S WHEEL SOLARGIL FC800
Silent model
Ref : FC800
UNDERGLAZE LIQUID ENSP20L CORAL 250GR
Coral ENSP20L underglaze liquid
Without lead Groupe 1
250gr
Firing temperature: 980°C-1050°C
LIQUID GLAZE EOSP19L MAUVE OPAQUE WITHOUT LEAD 250GR
Purple / mauve - EOSP19L
GROUPE I without lead
Firing temperature: 980°C
250gr
LIQUID GLAZE EOSP06L LILAC CLEAR OPAQUE WITHOUTLEAD 250GR
Lilac - EOSP06L
GROUP I free lead
Firing temperature: 980°C
250gr
ENGOBE LIQUIDE SOUS EMAIL ENSP09L VERT OLIVE 250GR
Vert olive ENSP09L
Engobe liquide prêt à l'emploi
Conditionnement : 250GR
Groupe I sans plomb
Cuisson 980°C - 1050°C
UNDERGLAZE LIQUID ENSP24L RED INTENSE 250GR
Red intense ENSP24L ENGOBE
GI without lead
250GR
