Français
Deutsch
Italiano
Español
There are no more items in your cart
REGULATION ATR-902
€426.00
VAT included
CONTROLLER ATR902 FOR ELECTRIC KILN
Temperature controllers ATR902 - 12ABC with microprocessor
Ref : REGULATR902
Plug-in process controller 15 cycles / 18 steps
Plug-in process controller, multi-poles connector, single loop.
It enables the programming of 15 cycles/programs which might include anything up to 18 steps/segments, all free selectable by the operator as rising/dwell/cooling steps.
Distinctive feature is the extremely user-friendly programming, easy to handle even for the unskilled operator.
To adapt this regulation ATR902 on your oven, you will have to indicate us:
The maximum temperature of the oven
The type of the probe or thermocouple (S or K normally)
The power of your oven in KW
Caution!
Without the right parameters the control will not work properly.
Kiln Temperature Controllers
CONTROLLER ATR902 FOR ELECTRIC KILN
Temperature controllers ATR902 - 12ABC with microprocessor
Ref : REGULATR902
Specifically conceived for hobby kilns, but suitable also for professional applications like ceramics/glass/jewelry/dental furnaces or laboratory kilns requiring temperature control versus time.
Special functions like Delayed Start, Waiting (useful whenever the process has a delay on the programmed setpoint), Cycle Recovery (after unexpected power failures) are included.
The multi-poles connector does not require electrical wirings and allows a straightforward installation/replacement.
Analogue input free selectable for different types of thermocouples (no separate ordering codes), two relay outputs programmable as command/alarm/auxiliary. All option are selectable by keyboard.
Including 15 configurable curves (programs) of cooking with 20 segments (ramps) each one.
Function: departure differed from 0 at 9:59 minutes
A configurable entry of measurements for thermo couple K, S, J, R, T, E, N
Supply 220 volts
2 exits relays 8 A
2 Displays
Algorithms ON-OFF with hysteresis
P, pi, P.I.D, PD at duration proportional
Manual or automatic Tunig
Possibility simple function regulator, example: Maintains with 900°C continuously
Format L 120 X 65 X 65 mm
Weights 400 gr. approx.
Connecting cable (1300mm) taken male (catch with 8 poles)
Female catch of connection 8 poles to be welded.
REGULATR902
Data sheet
| Type accessoires fours | Kiln controller Regelanlagen Regolamenti Regulador Régulations |
|---|