Français
CERAMIC REFRACTORY FIBRER IN ROLL SOLUBLE 1260°C EP 50 MM
Manganese brown F4352
SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century.
The fondant is already included in the mix.
Appliance with brush or in serigraphy
Advice :
Température 950-1200°C
Formula: Sn-Ca-Si-Cr-Mn
Deep cobalt blue F4343
SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century. The fondant is already included in the mix. Appliance with brush or in serigraphy
Firing temperature: 950-1250°C
Formula: Co-Si-Al
White partition F4313CD
This a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together excepted Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 940-1050°C
Leaded melting agent N°31 for leaded vitrifiable color.
GROUPE II with lead
Temperature of using : 750-800°C
HAND EXTRUDER STAINLESS STEEL WITH 6 PIECE DIE EX-115
Bio waterproofing clay for porous pieces - ZINSTONE
Ref : ETANBIO
Hard stainless steel palette half-oval 90 x 45 mm - EST302R
Cobalt blue - ES919
Temperature of firing : 950-1050°C
Groupe I
Without lead
Purple transparent with lead glaze ES8848
Firing temperature : 960-1040°C
Cobalt blue - ES850
Temperature of firing : 950-1050°C
Groupe I
Without lead
PERIWINKLE BLUE - ES8060
Temperature of firing : 960-1040°C
Groupe I
Without lead
Intense blue sky - ES8057
Temperature of firing : 950-1050°C
Groupe I
Without lead
Shiny transparent glaze - ES805
Middle green- ES265
Temperature of firing : 950-1050°C
Groupe III
With lead
Blue - ES243
Temperature of firing : 950-1050°C
Groupe III
With lead
Honey transparent - ES1048
Temperature of firing : 950-1050°C
Groupe II
With lead
Silver glazed - ES1000
Temperature of firing : 950-1050°C
Groupe III
With lead
COATING PROTECTION FIBER AND BRICKS 2500°C MAX HC100HT
Ref : ENDUI
Packaged in a 0.5 liter jar
LIQUID ENAMEL WITH EESP34 EFFECT ORANGE
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
Glittery transparent - EESP18
GROUPE I
Firing temperature: 980°C -1280°C
Leather sandy - EESP07
GROUPE I
Firing temperature: 980°C
Glittery antracite EESP03
GROUPE I
Firing temperature: 980°C
Lead free parrot green cadmium enamel - EECS 09
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free orange cadmium enamel - EECS 02
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
PROTECTION SHIELD FOR RADIANT HEAT MAX. 1390°C
Protection shield for radiant heat up to1390°C - ECRAN
SLIP GRES & PORCELAIN EASP04 MAKE-UP
'Make-up' stoneware & porcelain engobe - EASP04
POWDER
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips /
Firing range 980 - 1280°C
Brush application, soaking or spraying.
Eggplant transparent enamel - E68005
Range of colored transparent enamels.
They can be applied on white or red engobed paste.
Firing temperature 980 - 1020°C.
GLAZE WITH EFFECT E21017/82 LUSTER ORANGE AVENTURINE WITHOUT LEAD
Lustre orange "Aventurine"
Ref : E21017/82
BEIGE LUSTER AVENTURINE GLAZE UNLEADED E21017/81
Lustre "Aventurine"
Ref : E21017/81
BLACK LUSTER AVENTURINE GLAZE UNLEADED E21017/69
Lustre black "Aventurine"
Ref : E21017/69
DIAMOND ADHESIVE FOR 350MM 125µ POTTER'S WHEEL DISC
Ref : DISQDIAMTOURECH
Decor flux5 melting for serie P - DFLUX5
GROUPE II
Firing temperature: 900-950°C
Coefficient of expansion: 71
DENSIMETER 1600-1700 G / L
Precision densimeter - DENS16/17
Range 1600 - 1700 g / l
DENSIMETER 1500-1600 G / L
Precision densimeter - DENS15/16
Range 1500 - 1600 g / l
DURCI'DUR® Red Classic Range - DDR5
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
Green persian D96
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1050°C
Formula: Co-Pr
Blue of France D87
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Co-Si-Al-Zr
Copper ochre D72
COLOR D72 COPPER OCHRE
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Zr-Si-Al-Zn-Cr-Fe
deep pink D59
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Zr-Si-Al-Sn-Ca-Cr
White D56
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing temperature: 950-1200°C
Formula: Zr-Si-Al
Deep green D52
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing temperature: 950-1250°C
Formula: Cr-Al
Victoria green D50
Colors to paint D Set. These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it. Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing temperature: 950-1250°C
Formula: Zr-Si-Pr-Cr
Deep grey D25
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing température 950-1250°C
Formula: Sn-Sb-Zr-V
Cobalt blue D202
Colouring oxide range with unlead fondant incorporated in the formula.
Possibility to mix those colours and to use them on or under the glaze.
Firing temperature: 980-1020°C
Fomula: Co-Si
COLOR D05 BROWN CHOCOLATE
Chocolate brown D05
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing Température 950-1250°C
Formula: Zn-Fe-Cr-Al
Red brown D04
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing Température 950-1250°C
Formula: Zn-Al-Cr-Fe
Deep yellow ochre D01
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes :between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Zr-Si-Fe-Pr-Zn
Forged steel modelling double-end tool stainless steel for clay 17.8 cm - CULT1424
Forged steel modelling tool iron L. 17.5 cm - CULT1412
Classical sculpture tool for clay, wax, ceramic, etc... L. 25 cm - CT1114
Matt light pink opaque enamel - CSM 118
This is a collection of matt colored enamels prepared for the "cuerda seca" technique.
CSM-100 series matt enamels for cuerda seca can be used for white and red paste.
The recommended firing temperature is 980ºC-1000ºC.
Matt black opaque enamel - CSM 117
This is a collection of matt colored enamels prepared for the "cuerda seca" technique.
CSM-100 series matt enamels for cuerda seca can be used for white and red paste.
The recommended firing temperature is 980ºC-1000ºC.
Matt water green opaque enamel - CSM 112
This is a collection of matt colored enamels prepared for the "cuerda seca" technique.
CSM-100 series matt enamels for cuerda seca can be used for white and red paste.
The recommended firing temperature is 980ºC-1000ºC.
Opaque glaze with effect Chattered cream CS6040
Advice :
Temperature of firing : 980-1020°C
Dilation coeff 25-300°C : 62
Mentions :
Presence of lead. Possibility to use for alimentary production under conditions
Blue green CS476
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Green CS446
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Grey CS431
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing Temperature : 980C
GROUPE II
CUERDA SECA
Lilac CS423
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Opaque orange cadmium enamel - CS 220
For the enameling of ceramic pieces on white and red clay.
Recommended firing temperature, between 960-980ºC.
White - CS 215
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Dark brown - CS 213
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Light brown - CS 212
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Blue - CS 206
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Light brown - CS 205
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Eggplant - CS 201
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
DIGITAL PORTABLE LABORATORY SCALE 1500 G / 0.1 G
Maximum range 1500 g / Precision 0,1 g - CQT1501
SCALE WEIGHING BAG ENAMEL , CLAY 35 KG / 10 G
Maximum range 35 kg / Accuracy 10 g - CPWPL35
SPECIAL RED GLUE FOR DOOR GASKET 310 ML TUBE
Tube of 310 ml. High temperature maxi 300°C.
Application with a spray gun.
Ideal for braiding for insulation of furnace or boiler doors.
High temperature resistant glue up to 300°C maximum.
Ref : COLJOINT
COLOUR FREE LEAD CD25 BROWN BLACK
Brown dark- CD25
Without lead
Firing temperature: 980-1280°C
Formula: Ni-Zn-Fe-Cr
COLOUR FREE LEAD CD23 LEMON GREEN
Lemon green- CD23
Without lead
Firing temperature: 980-1280°C
Formula: Zr-Si-Pr-V
Sevres blue CC09
Engobes range. Possibility to mix them together. Usable on raw pieces or bisquewares, for soaking or decoration.
Temperature of firing : 940-1000°C
Free of lead
Brown CC05
Engobes range. Possibility to mix them together. Usable on raw pieces or bisquewares, for soaking or decoration.
Temperature of firing : 940-1000°C
Free of lead
Toffee CC03
Engobes range. Possibility to mix them together. Usable on raw pieces or bisquewares, for soaking or decoration.
Temperature of firing : 980-1000°C
Free of lead
SCALE CBX1201 CAPACITY 1200G PRECISION0.1G
Ref : CBX1201
Capacity 1200gr
Accuracy 0.1g
Pan size 148x148mm
Gross weight 0.69kg
DIGITAL PORTABLE LABORATORY SCALE 3000 G - PREC 1 G
Maximum range 3000 g / Precision 1 g
Ref : CB3000
DIGITAL PORTABLE LABORATORY SCALE 1000 G - PREC 0,1 G
Maximum range 1000 g / Precision 0,1 g
Ref : CB1001
Medium nozzle head for slip trailer red pear Ø 1 mm - CANULE1
6140 Extra white (Rutile)
Pigment obtained by a succession of chemical reaction.
In powder at a dry state
1 JAR ROLLER MILL R6000 ECO
Ref : BROYEUR6000
R6000 ECO jar crusher
6411 Blue of Prussia D
Pigment obtained by a succession of chemical reaction.
In powder at a dry state
PIGMENTS BORDEAUX 6500D
Ref : BOR Bordeaux
Cadmium Pigment
PIGMENT BLANC MEUDON "6039"
Natural pigment White of Meudon
Natural pigments have a lot of advantages: inalterability to ultraviolet rays, high covering power and can be mixed between them anf non toxics.
