Best sellers

Glittery antracite EESP03

GROUPE I

Firing temperature: 980°C

Glittery mustard - EESP02

GROUPE I

Firing temperature: 980°C

Lead free parrot green cadmium enamel - EECS 09

Cadmium selenium effect.

Series of colored lead-free enamels of great intensity with a specific formulation.

They can be applied on any type of paste, white or red.

Suitable for decorating culinary pieces.

The application can be done by dipping, spraying or with a pear.

The recommended firing temperature is 980-1080°C.

It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.

High coefficient of expansion to be taken into account in order to avoid cracking.

These enamels require a thick coat.

Lead free orange cadmium enamel - EECS 02

Cadmium selenium effect.

Series of colored lead-free enamels of great intensity with a specific formulation.

They can be applied on any type of paste, white or red.

Suitable for decorating culinary pieces.

The application can be done by dipping, spraying or with a pear.

The recommended firing temperature is 980-1080°C.

It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.

High coefficient of expansion to be taken into account in order to avoid cracking.

These enamels require a thick coat.

PROTECTION SHIELD FOR RADIANT HEAT MAX. 1390°C

Protection shield for radiant heat up to1390°C - ECRAN

SLIP GRES & PORCELAIN EASP04 MAKE-UP

'Make-up' stoneware & porcelain engobe - EASP04

POWDER

Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.

These engobes are available in liquid or powder.

At earthenware temperature, the colors will be more pastel than presented.

Tips /

Firing range 980 - 1280°C

Brush application, soaking or spraying.

Transparent glaze Emerald green E89283

Advice :

Temperature of firing : 960-1040°C

Mentions :

GROUPE III

Presence of lead. Use only for decorative production

Eggplant transparent enamel - E68005

Range of colored transparent enamels.

They can be applied on white or red engobed paste.

Firing temperature 980 - 1020°C.

GLAZE WITH EFFECT E21017/82 LUSTER ORANGE AVENTURINE WITHOUT LEAD

Lustre orange "Aventurine"

Ref : E21017/82

BEIGE LUSTER  AVENTURINE GLAZE UNLEADED  E21017/81

Lustre "Aventurine"

Ref : E21017/81

BLACK LUSTER AVENTURINE GLAZE UNLEADED  E21017/69

Lustre black  "Aventurine"

Ref : E21017/69

DIAMOND ADHESIVE FOR 350MM 125µ POTTER'S WHEEL DISC

Ref : DISQDIAMTOURECH

Decor flux5 melting for serie P - DFLUX5

GROUPE II

Firing temperature: 900-950°C

Coefficient of expansion: 71

DENSIMETER 1600-1700 G / L

Precision densimeter - DENS16/17

Range 1600 - 1700 g / l

DENSIMETER 1500-1600 G / L

Precision densimeter - DENS15/16

Range 1500 - 1600 g / l

Green persian D96

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.

Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis

Firing température 950-1050°C

Formula: Co-Pr

Blue of France D87

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.

Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis

Firing température 950-1250°C

Formula: Co-Si-Al-Zr

Copper ochre D72

COLOR D72 COPPER OCHRE

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.

Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis

Firing température 950-1250°C

Formula: Zr-Si-Al-Zn-Cr-Fe

deep pink D59

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis

Firing température 950-1250°C

Formula: Zr-Si-Al-Sn-Ca-Cr

White D56

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis

Firing temperature: 950-1200°C

Formula: Zr-Si-Al

Deep green D52

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis

Firing temperature: 950-1250°C

Formula: Cr-Al

Victoria green D50

Colors to paint D Set. These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it. Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.

Firing temperature: 950-1250°C

Formula: Zr-Si-Pr-Cr

Deep grey D25

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.

Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.

Firing température 950-1250°C

Formula: Sn-Sb-Zr-V

Cobalt blue D202

Colouring oxide range with unlead fondant incorporated in the formula.

Possibility to mix those colours and to use them on or under the glaze.

Firing temperature: 980-1020°C

Fomula: Co-Si

COLOR D05 BROWN CHOCOLATE

Chocolate brown D05

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.

Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.

Firing Température 950-1250°C

Formula: Zn-Fe-Cr-Al

Red brown D04

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.

Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.

Firing Température 950-1250°C

Formula: Zn-Al-Cr-Fe

Deep yellow ochre D01

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.

Usable under glaze or on it.

Can be used to color the glazes :between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis

Firing température 950-1250°C

Formula: Zr-Si-Fe-Pr-Zn

Forged steel modelling double-end tool stainless steel for clay 17.8 cm - CULT1424

Forged steel modelling tool iron L. 17.5 cm - CULT1412

Classical sculpture tool for clay, wax, ceramic, etc... L. 25 cm - CT1114

Matt light pink opaque enamel - CSM 118

This is a collection of matt colored enamels prepared for the "cuerda seca" technique.

CSM-100 series matt enamels for cuerda seca can be used for white and red paste.

The recommended firing temperature is 980ºC-1000ºC.

Matt black opaque enamel - CSM 117

This is a collection of matt colored enamels prepared for the "cuerda seca" technique.

CSM-100 series matt enamels for cuerda seca can be used for white and red paste.

The recommended firing temperature is 980ºC-1000ºC.

Matt water green opaque enamel - CSM 112

This is a collection of matt colored enamels prepared for the "cuerda seca" technique.

CSM-100 series matt enamels for cuerda seca can be used for white and red paste.

The recommended firing temperature is 980ºC-1000ºC.

Opaque glaze with effect Chattered cream CS6040

Advice :

Temperature of firing : 980-1020°C                       

Dilation coeff 25-300°C : 62

Mentions :

Presence of lead. Possibility to use for alimentary production under conditions

Blue green CS476

This is a set of specific glazes for the Cuerda Seca technic.

Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.

Inside these plans, you put glazes with brushes ou with syringe.

Colors are used deluted with water to obtain a thick mix.

CS200 is usable on red bisqueware : they are opaque.

CS set400 is usable on white or light medium : they are transparent.

All these colors can be mixed together except Red CS210 and Orange CS211.

Colors don't flow, even used in the vertical way.

Firing temperature : 980°C

GROUPE II