Best sellers

GSA Les Perchers Normand Exclusive clay from Solargil - PERCHERS

Natural sandstone quarry - Carrière Les Perchers in Saint Amand en Puisaye.

Smoother, fatter and more pyrite than Les Beaux-Arts.

Recommended for traditional firing (salt, wood) and very large hand-turned pieces.

REFRACTORY BRAIDED STRIP 5 MM THICK, 50 MM WIDE PER ML

Nickel/chrome ceramic strip Thickness 05mm - The linear metre

Ref : TRESBAN5

Ceramic rope 1320°C Ep 5 mm Larg 50 mm

Ceramic tape

Natural ochre yellow pigment "6203"

Ref : OJA

Yellow Ochre (or limonit clay) is extracted from our quarry of Saint Amand en Puisaye (Burgundy).

It's a natural ochre used into painting, cement and for coloring clays, glazes, etc.

The active ingredient is the iron oxide or goetlite

EXTRA WHITE SODIC FELDSPAR FOR ENAMELS

Extra white sodic feldspar for enamels

Ref : FELDSVDSE

LIQUID SLIP STONEWAR & PORCELAIN EASP01LL WHITE 1KG

White stoneware & porcelain engobe - EASP01LL

Liquid slip in 1kg

Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.

These engobes are available in liquid or powder.

At earthenware temperature, the colors will be more pastel than presented.

Tips :

Firing range 980 - 1280°C

Brush application, soaking or spraying.

Green pen 603

Ceramic pen
Firing temperature: 950-1300°C

LIGHT INSULATING REFRACTORY BRICK 1550°C-28T

Light insulating brick 1550 ° C

Dimensions: 230 x 114 x 60mm. To 1550 ° C.
Weight 1.66 kg / U

ALUMINA BALLS Ø 1MM PER KG

Ref : BILALU1

Diameter 1mm - Sold by the kg

 92% alumina

Milling ball

SHARP KNIFE VERY FINE 36

Very thin knife for potter -36

Transparent glaze brilliant 010485

Glazes for stoneware and porcelains
Temperature of firing : 1250-1300°C

Groupe I

Crystallized yellow 010275/2

Glazes for stonewares and porcelains.

GROUPE I

Firing temperature: 1250-1320°C

Chattered green lime 010257 TILLEUL JASPER

Glazes for stonewares and porcelains.

Temperature of firing : 1250-1320°C

PSL porcelain very white and very fine - PSL

https://youtu.be/q8WI4D4st7g

Red stoneware Brasil grog 40% 0-0,2 mm - BRASIL002

ROUND METAL REFRACTORY SUPPORT Diam. 60 mm 1280°C

Simple refractory support Ø 60 H 17 mm n°49-60

Ref : SUP60MR

Single steel stilt Ø 60 H 17 mm n°49-60

LARGE MIRETTES SHORT LENGTH CUTTING WIRE H. 20 CM N ° 31

Coiled ribbon tools N°1 H 20 cm -

Ref : SC8

Orange coloured porcelain - PNT2

Smooth porcelain.

For throwing, modeling and jewelry.

12 colour.

Complet kit Including, the probe type thermometer + K (1200 ° C) 250mm long + 3m compensating cable.

This kit comes fully assembled. Without batteries

Brown humus jaspé GEESP000/18

GROUPE I

Firing temperature 980-1280°C

AQUAMARINE BLUE TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE408

Blue aquamarine 

Ref : GE408

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

DURCI'DUR® White Classic Range - DDB1.5

Natural clay with hardener, for modeling that hardens to air without the need of firing.

Dries in 24-48h depending on the thickness to give realizations resistant to shocks.

European Standard Toys EN-71/3.

Don’t stain the hands.

Does not fire, does not enamel.

Available in several colours.

COLOUR LEAD FREE CD11 BLACK

Black- CD11

Without lead

Firing temperature: 980-1280°C

Formula: Co-Fe-Cr-Mn

COLOUR LEAD FREE CD03 BLUE TURQUOISE

Turquoise- CD03

Without lead

Firing temperature: 980-1280°C

Formula: Zr-V-Si

CARBORUNDUM 500 MICRONISE

CARBORA

Hole cutter small model Ø 5 mm- 538

Bright deep blue 06004

Bright deep blue 06004

Glazes for stoneware and porcelains
Temperature of firing : 1250-1320°C

Use Stoneware Glazes on any midrange clay body.

These glazes are intended for use at 1250-1320°C

GLAZE FOR STONEWARE 010111 BRIGHT BROWN

Special white clay Raku grog 40% 0-0.5 mm - RAKUMITSU005

Special white clay Raku intangible grog 40% 0-0.2 mm - RAKUMITSU002

ROUND METAL REFRACTORY SUPPORT Diam. 50 mm 1260°C

Refractory round metal tripod T° 1260°C D 50 mm

Height 16mm - Diameter: 50mm

Ref : SUP50MR

Refractory metal stilts T° 1260°C D 50 mm

Silicone rib rectangular 100 x 49 mm -SPA8

Purple coloured porcelain - PVT2

Smooth porcelain.

For throwing, modeling and jewelry.

12 colour.

CERAMIC PIGMENT P33 GREEN CELADON

celadon green P33

P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.

ZIRCONIUM OXIDE

Ref : OXYZIRB

Black iron oxide

Ref : OXFERNR

WIRE RESISTANCE KANTHAL 3 MM FOR 1350°C THE METER

Ref : FILKAN3

Kanthal resistance wire Ø 3 mm

3 mm - price per meter
Ability to kg = 20 ml/kg

Hard stainless steel palette drop of water 69 x 36 mm - EST311R

Hard stainless steel palette half-moon 120 x 50 mm - EST305R

LIQUID ENGOBE FOR STONEWARE AND PORCELAIN EASP06L RED 250GR

Collection suitable for single-firing and dual-firing with maximum color development at 1280°C.

These engobes are available in liquid or powder.

At earthenware temperature, the colors will be more pastel than presented.

Tips /

Firing range 980 - 1280°C

Brush application, soaking or spraying.

DURCI'DUR® Red Classic Range - DDR1.5

Natural clay with hardener, for modeling that hardens to air without the need of firing.

Dries in 24-48h depending on the thickness to give realizations resistant to shocks.

European Standard Toys EN-71/3.

Don’t stain the hands.

Does not fire, does not enamel.

Available in several colours.

Wood rib angular half moon - 65

Transparent glaze - 5460

Lead-free shiny transparent enamel widely used for enamelling white majolica, for its transparency, brilliance and good color development.

It can be used for culinary ceramics since it is lead free.

Can be decorated both under and on the enamel.

Specially indicated for obtaining colored enamels.

The firing temperature varies between 980-1040°C.

Curved aluminium compass 30 cm - 49

Yellow mustarde 010587 glaze

GROUPE I

Firing temperature: 1250-1300°C

Beige fire refractory stoneware for culinary use grog 30% 0-1 - GM76

Clay intented to withstand thermal shocks including direct flame (if fired at 1250°C minimum).

Adaptable to all production techniques.

Colour white-beige in oxidation and grey in reduction.

Stoneware cement grey grog 25% 0-0,5 mm - GCIMENT

Red stoneware Brasil grog 40% 0-0,2 mm - BRASIL002

Groged

Tournette bois basse - TTB24

 Ø 240 mm

Plastic sieve with stainless steel mesh Ø 24 / 80 µ - TAMISB24

Transparent boro calcium enamel - PR1430

Transparent and glossy enamel, lead-free.

REFRACTORY PILLAR H 300 mm Diam.43 mm 1350°C

Pillars - Props

Temp 1350 ° C - H 300mm Ø 43mm

Fragile material, can not be sent by post.

Electronic Potter's wheel "LITTLE FROG" model TY16

Potter's wheel for pottery initiation.

Power 380 W in 220 Volt monophase (usual plug)

MIRETTE DOUBLE STAINLESS STEEL CUTTING TOOL L 200 MM - FR381

Professional cutting tool

POTASSIC FELDSPATH ICE10

Ref : FELDSICE10

Potassic feldspath ICE10

%Perte au feu 0.6

CONE ORTON - SELF-HELDING FUSE WATCH BOX OF 25

Ref : CONEAUTOBOX

REFRACTORY GROG 0-0.5

Ref : CHAM005

COLOUR FREE LEAD CD26 GREY GREENISH

Grey greenish - CD26

Without lead

Firing temperature: 980-1280°C

Formula: Zr-Si-Ni-Co

COLOUR LEAD FREE CD02 BLUE COBALT

Blue cobalt-CD02

Without lead

Firing temperature: 980-1280°C

Formula: Co-Si

Stem 1400°C maximum L 300x4 mm - 4000003000

Mini ribbon molding clay 11 cm - Set of 5 - 903

Hole cutter medium model Ø 8 mm - 537

Conical sponge on wooden handle - 035HM001

smaller diameter 20 mm

L. 89 mm

Fine natural sponge appearance.

Glaze Bright transparent 0302

Temperature of firing : 1200-1270°C

Groupe I

Lavender blue 010295

Glazes for stonewares and porcelains.

Temperature of firing : 1250-1300°C

LIQUID GLAZE ETSP01L TRANSPARENT BRIGHT WITHOUTLEAD 250GR

Transparent liquid glaze - ETSP01L

250GR

Yellow flecked black PSE24

Advice:

Firing temperature : 980°C

Mentions :

GROUPE II

Presence of lead.

Stoneware tone stone grog 30% 0,0-5 - GTP005

Smooth white stoneware - FLAXEN00

White stoneware clay containing 3 to 4% cellulose fibre, smooth.

Gauge poste in cast aluminium with 2 arms rubber tip Ø 120 x H 370 mm - TRUSQ87

Arm 390 mm

Wheel Height Throwing Gauge

Silica ENS for setting

Ref : SICEPE

Glossy white enamel - PR 115

Composed of Frit.

High gloss Opaque White enamel, low expansion.

Can be used with excellent results on tiles or red earthenware as well as white majolica.

The firing temperature varies between 1000-1080ºC.

Kiln refractory round plates 1340 ° C max Ø 350 x 12 mm (3kg)

Fragile material, can not be sent by post.

PEPTAPON 5 Suspensive "tempered glaze"

Ref : PEP5

CERAMIC PIGMENT P28 GREEN APPLE

Stain Apple green P28

Mass colourings 1300°C. Pur colourings of the P range are used to color masses : Porcelain and white earthenware.

Red smooth modeling clay - MROUGE10

CUTTING TOOL L 220 MM N°15

Simple ribbon  tools L. 220 mm N°15 - MIR73

Simple ribbon  tools L. 220 mm N°16 - MIR50

Double ribbon  tools L. 265 mm N°13 - MIR48

Simple ribbon  tools L. 220 mm N°8 - MIR46

Pigment hématite "6253" - HEM

Hematit is extracted from our quarry of Saint Amand en Puisaye (Burgundy). It's a natural iron ochre used into painting, cements and for coloring clays, glazes.

GLAZE STONEWARE/PORCELAIN GEESP05 ANTHRACITE JASPE WITHOUT LEAD

Anthracite jaspe GEESP05

GROUPE I

Firing temperature: 1250-1300°C

Transparent glaze ES6010

Glazes for stoneware and porcelains
Temperature of firing : 1250-1300°C

Groupe I

Without lead

Celadon green stoneware & porcelain engobe - EASP09

Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.

These engobes are available in liquid or powder.

At earthenware temperature, the colors will be more pastel than presented.

Tips /

Firing range 980 - 1280°C

Brush application, soaking or spraying.

Red stoneware & porcelain engobe - EASP06

Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.

These engobes are available in liquid or powder.

At earthenware temperature, the colors will be more pastel than presented.

Tips /

Firing range 980 - 1280°C

Brush application, soaking or spraying.

Stoneware & porcelain engobe base to color - EASP00

Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.

These engobes are available in liquid or powder.

At earthenware temperature, the colors will be more pastel than presented.

Tips:

Firing range 980 - 1280°C

Brush application, soaking or spraying.

DURCI'DUR® Red Classic Range - DDR10

Natural clay with hardener, for modeling that hardens to air without the need of firing.

Dries in 24-48h depending on the thickness to give realizations resistant to shocks.

European Standard Toys EN-71/3.

Don’t stain the hands.

Does not fire, does not enamel.

Available in several colours.

COLOUR LEAD FREE CD01 YELLOW

Yellow- CD01

Without lead

Firing temperature: 980-1050°C

Formula: Zr-Si-Pr

Cobalt carbonate

Ref : CARCO

LEAD FOR 1400°C S TYPE THERMOCOUPLE THE LINEAR METER

Compensating cable shielded probe S type 1400 ° C - the ml

Ref : CABLTHER.14

White bisqueware tile pressed earthenware 300x200x7mm

Pack of 16 U.

REFRACTORY STAINLESS STEEL 1200 ° C L 200 x 2 MM FOR LIGHT OBJECT

Bar L 200x2 mm. For light pieces

REFRACTORY STAINLESS STEEL 1200 ° C
bar length 200 mm x diameter 2 mm.
Rod 1200 ° C maximum beyond a slight deformation appears
Ideal for baking beads and ceramic jewelry

ALUMINA STEM PURE 1400°C L200 X 4 MM

Cylindrical sponge wood handle

Ref : 196R25HM

RUBBER HALF MOON RIB SMALL MODEL 95 MM 185

Rubber half-moon rib small model 95 mm 

Ref : 185

TOOLS PEAR TAPERED SPONGE STICK 35 MM L 89 MM

Sponge shaped drop of water wooden handle

Ref : 175LCHM0

Cracked opac white 06054

Glazes for stoneware and porcelains
Temperature of firing : 1250-1300°C

Wollastonite

WOLLA

Ultra black smooth earthenware - PFHN

REFRACTORY SUPPORT CORDIERITE Diam.88 mm 1260°C

Tripod refractory cordierite round tripod T° 1260°C D 88 mm

Diameter: 88mm - Height: 87mm

Ref : SUP80

Refractory stilts (support) T° 1260°C D 88 mm

1 SET OF RESISTANCES FOR CUTLERY OVEN

Ref : RESICOUT

Glossy transparent enamel - PR233

Composed of Frit.

Glossy transparent enamel, lead free.

For glazing ceramic pottery pieces in red or white clay.

Firing temperature, between 950-1020ºC.

CERAMIC OXIDE P78 GREEN GRASS

Green grass P78

P set colouring oxides lik Pur.

BLUE AZAFATA PIGMENT  P20

Azafata blue P20

Ceramic pigment

P set colouring oxides lik Pur.

PINK PIGMENT P194

Pink P194

Ceramic pigment

Mass colourings 1300°C.

GOLDEN YELLOW PIGMENT P15

Golden yellow P15

 Ceramic pigment

Mass colourings 1300°C.

TURQUOISE BLUE PIGMENT P10

MOLOCHITE

Molochite 200

Calcined kaolin allows the introduction of alumina into glazes without affecting the rheology of the baths as with natural kaolins which are used more as suspensives.



It is kaolin calcined at high temperatures, as the chemical water, carbon dioxide and other volatile gases have been eliminated, thus obtaining the purest form of Kaolin.

It is used in white clay, porcelain and glazes.

SHORT CUTTING TOOL 120 MM N°4 ROUND

Simple ribbon  tools stainless steel L. 120 mm N°4 - MIR76

Double ribbon  tools L. 265 mm N°14 - MIR49

Soft thoothed stainless steel palette half-oval 102 x 53 mm - EST304S

'Rosewood' stoneware & porcelain engobe - EASP05

Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.

These engobes are available in liquid or powder.

At earthenware temperature, the colors will be more pastel than presented.

Tips /

Firing range 980 - 1280°C

Brush application, soaking or spraying.

Refractory grog 0-1.5mm

Ref : CHAM015

refractory grog 0-0.2mm

Ref : CHAM0-02

Alumina hydrate

Molar formula

Al2O3              

Molar mass = 102

Rib rigid "half-moon" - 26

WIDE FLAT BRUSH Hake 50 mm

GLAZE STONEWARE 06001 MATT CRYSTALLIZED BLUE

Matte (or matt) surface in glaze(glaze is NOT shiny, matte is the opposite of glossy)

Glazes for stonewares and porcelains.

Dark copper lustre 010567

GROUPE III

Firing temperature: 1250-1320°C

Bronze green jaspe 010271

Glazes for stonewares and porcelains.

Temperature of firing : 1250-1300°C

UNDERGLAZE ENGOBE LIQUID ENSP03L BLACK 250GR

Black ENSP03L liquid

Without lead Groupe 1

250GR

Firing temperature: 980°C-1050°C

Black stoneware Super Manga 35% grog 0-0.5 mm - SUPERMANG0-05

Dark Stoneware Clay Groleg

Green flecked black PSE25

PSE range. Glaze with gleams

Advice :

Firing temperature : 980°C

Mentions :

Presence of lead.

White earthenware grog 20% 0-0.5 - JASMIN05

Wild stoneware, grès fauve chamotte 45% 1-3 mm - GRESAUVAGE

This clay, formulated from natural clay, is a special feature of SOLARGIL®.

Groleg

Smooth extra white porcelain - FLAXPO

Porcelain with 3 to 4% cellulose fiber, smooth.

ULEX

Ulexite

Formule molaire

CaO= 0,667     

B2O3 = 1,664

Na2O= 0,333                           

Masses molaires: 333,79

REFRACTORY TUBE SUPPORTING ELECTRICAL RESISTANCE 1400°C Ø EXT.40 X Ø INT 30 X L1600 MM - LE CM

Tube props 1400°C Ø ext. 40mm Int. 30mm

Ref : TSUPRES40

Ceramic Pipe

Tube props 1400°C Ø ext. 35mm Int. 25mm

Ref : TSUPRES35

DOUBLE REFRACTORY METAL SUPPORT ROUND Ø 80 MM 1260°C

Double refractory support Ø 80 H 22 mm n°50-80

Ref : SUPDOU80

WOOD BAT diaméter 265 mm for potters wheels PWDC and TE9 WEELY

For wheel head equipped with device for quick change of MDF wooden batts

Ref : SIT265

SEROIL CS 71

 

SEROIL CS71 WATER BASED MEDIUM SLOW DRYING

Seriol CS71 or L14 - Water based medium for 3rd fire decoration

Ref : SERIOL

Inox short ruler - REGLED30

L. 300 mm / 2 sides

Red pear engobe 150 ml with integrated cannula opening 3 mm - RB-L

GLAZE STONEWARE/PORCELAIN PO6053/10 BLUE SKY SATIN FINISH

Blue sky satin finish PO6053/10

Kiln refractory round plates 1340 ° C max Ø 394 x 13 mm (3.7kg)

Fragile material, can not be sent by post.

Anise green blue P32/00

P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.

Firing temperature: 980-1300°C

Formula: Zr-Pr-V

SALMON PINK PIGMENT P191

Salmon pink P191

Ceramic pigment

P set colouring oxides lik Pur.