Best sellers

Manganese dioxide ( bag of 25kg)

Glaze Matt black 010571

GROUPE I

Firing temperature: 1250-1300°C

Transparent glaze brilliant 010485

Glazes for stoneware and porcelains
Temperature of firing : 1250-1300°C

Groupe I

Crystallized yellow 010275/2

Glazes for stonewares and porcelains.

GROUPE I

Firing temperature: 1250-1320°C

GSA Les Perchers Normand Exclusive clay from Solargil - PERCHERS

Natural sandstone quarry - Carrière Les Perchers in Saint Amand en Puisaye.

Smoother, fatter and more pyrite than Les Beaux-Arts.

Recommended for traditional firing (salt, wood) and very large hand-turned pieces.

REFRACTORY BRAIDED STRIP 5 MM THICK, 50 MM WIDE PER ML

Nickel/chrome ceramic strip Thickness 05mm - The linear metre

Ref : TRESBAN5

Ceramic rope 1320°C Ep 5 mm Larg 50 mm

Ceramic tape

INTENSE YELLOW PIGMENT P508

Intenses yellow P508

P set colouring oxides lik Pur.

Natural ochre yellow pigment "6203"

Ref : OJA

Yellow Ochre (or limonit clay) is extracted from our quarry of Saint Amand en Puisaye (Burgundy).

It's a natural ochre used into painting, cement and for coloring clays, glazes, etc.

The active ingredient is the iron oxide or goetlite

LIQUID SLIP STONEWAR & PORCELAIN EASP01LL WHITE 1KG

White stoneware & porcelain engobe - EASP01LL

Liquid slip in 1kg

Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.

These engobes are available in liquid or powder.

At earthenware temperature, the colors will be more pastel than presented.

Tips :

Firing range 980 - 1280°C

Brush application, soaking or spraying.

Green pen 603

Ceramic pen
Firing temperature: 950-1300°C

COLOUR LEAD FREE CD11 BLACK

Black- CD11

Without lead

Firing temperature: 980-1280°C

Formula: Co-Fe-Cr-Mn

LIGHT INSULATING REFRACTORY BRICK 1550°C-28T

Light insulating brick 1550 ° C

Dimensions: 230 x 114 x 60mm. To 1550 ° C.
Weight 1.66 kg / U

ALUMINA BALLS Ø 1MM PER KG

Ref : BILALU1

Diameter 1mm - Sold by the kg

 92% alumina

Milling ball

SHARP KNIFE VERY FINE 36

Very thin knife for potter -36

Bright deep blue 06004

Bright deep blue 06004

Glazes for stoneware and porcelains
Temperature of firing : 1250-1320°C

Use Stoneware Glazes on any midrange clay body.

These glazes are intended for use at 1250-1320°C

Chattered green lime 010257 TILLEUL JASPER

Glazes for stonewares and porcelains.

Temperature of firing : 1250-1320°C

PSL porcelain very white and very fine - PSL

https://youtu.be/q8WI4D4st7g

Smooth Valencia porcelain - PSAF

Red stoneware Brasil grog 40% 0-0,2 mm - BRASIL002

ROUND METAL REFRACTORY SUPPORT Diam. 60 mm 1280°C

Simple refractory support Ø 60 H 17 mm n°49-60

Ref : SUP60MR

Single steel stilt Ø 60 H 17 mm n°49-60

LARGE MIRETTES SHORT LENGTH CUTTING WIRE H. 20 CM N ° 31

Coiled ribbon tools N°1 H 20 cm -

Ref : SC8

Complet kit Including, the probe type thermometer + K (1200 ° C) 250mm long + 3m compensating cable.

This kit comes fully assembled. Without batteries

Brown humus jaspé GEESP000/18

GROUPE I

Firing temperature 980-1280°C

EXTRA WHITE SODIC FELDSPAR FOR ENAMELS

Extra white sodic feldspar for enamels

Ref : FELDSVDSE

COLOUR LEAD FREE CD03 BLUE TURQUOISE

Turquoise- CD03

Without lead

Firing temperature: 980-1280°C

Formula: Zr-V-Si

Cobalt carbonate

Ref : CARCO

GLAZE FOR STONEWARE 010111 BRIGHT BROWN

Special white clay Raku grog 40% 0-0.5 mm - RAKUMITSU005

Stoneware tone stone grog 30% 0,0-5 - GTP005

Beige fire refractory stoneware for culinary use grog 30% 0-1 - GM76

Clay intented to withstand thermal shocks including direct flame (if fired at 1250°C minimum).

Adaptable to all production techniques.

Colour white-beige in oxidation and grey in reduction.

Tournette bois basse - TTB24

 Ø 240 mm

Tournette bois basse - TTB16

 Ø 16 mm

Plastic sieve with stainless steel mesh Ø 24 / 80 µ - TAMISB24

ROUND METAL REFRACTORY SUPPORT Diam. 50 mm 1260°C

Refractory round metal tripod T° 1260°C D 50 mm

Height 16mm - Diameter: 50mm

Ref : SUP50MR

Refractory metal stilts T° 1260°C D 50 mm

Purple coloured porcelain - PVT2

Smooth porcelain.

For throwing, modeling and jewelry.

12 colour.

Transparent boro calcium enamel - PR1430

Transparent and glossy enamel, lead-free.

Orange coloured porcelain - PNT2

Smooth porcelain.

For throwing, modeling and jewelry.

12 colour.

CERAMIC PIGMENT P33 GREEN CELADON

celadon green P33

P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.

ZIRCONIUM OXIDE

Ref : OXYZIRB

Black iron oxide

Ref : OXFERNR

WIRE RESISTANCE KANTHAL 3 MM FOR 1350°C THE METER

Ref : FILKAN3

Kanthal resistance wire Ø 3 mm

3 mm - price per meter
Ability to kg = 20 ml/kg

POTASSIC FELDSPATH ICE10

Ref : FELDSICE10

Potassic feldspath ICE10

%Perte au feu 0.6

Hard stainless steel palette drop of water 69 x 36 mm - EST311R

Hard stainless steel palette half-moon 120 x 50 mm - EST305R

LIQUID ENGOBE FOR STONEWARE AND PORCELAIN EASP06L RED 250GR

Collection suitable for single-firing and dual-firing with maximum color development at 1280°C.

These engobes are available in liquid or powder.

At earthenware temperature, the colors will be more pastel than presented.

Tips /

Firing range 980 - 1280°C

Brush application, soaking or spraying.

DURCI'DUR® Red Classic Range - DDR1.5

Natural clay with hardener, for modeling that hardens to air without the need of firing.

Dries in 24-48h depending on the thickness to give realizations resistant to shocks.

European Standard Toys EN-71/3.

Don’t stain the hands.

Does not fire, does not enamel.

Available in several colours.

CONE ORTON - SELF-HELDING FUSE WATCH BOX OF 25

Ref : CONEAUTOBOX

CARBORUNDUM 500 MICRONISE

CARBORA

Wood rib angular half moon - 65

Transparent glaze - 5460

Lead-free shiny transparent enamel widely used for enamelling white majolica, for its transparency, brilliance and good color development.

It can be used for culinary ceramics since it is lead free.

Can be decorated both under and on the enamel.

Specially indicated for obtaining colored enamels.

The firing temperature varies between 980-1040°C.

Hole cutter small model Ø 5 mm- 538

Curved aluminium compass 30 cm - 49

Yellow mustarde 010587 glaze

GROUPE I

Firing temperature: 1250-1300°C

Special white clay Raku intangible grog 40% 0-0.2 mm - RAKUMITSU002

Red stoneware Brasil grog 40% 0-0,2 mm - BRASIL002

Groged

REFRACTORY PILLAR H 300 mm Diam.43 mm 1350°C

Pillars - Props

Temp 1350 ° C - H 300mm Ø 43mm

Fragile material, can not be sent by post.

MOLOCHITE

Molochite 200

Calcined kaolin allows the introduction of alumina into glazes without affecting the rheology of the baths as with natural kaolins which are used more as suspensives.



It is kaolin calcined at high temperatures, as the chemical water, carbon dioxide and other volatile gases have been eliminated, thus obtaining the purest form of Kaolin.

It is used in white clay, porcelain and glazes.

MIRETTE DOUBLE STAINLESS STEEL CUTTING TOOL L 200 MM - FR381

Professional cutting tool

Transparent glaze ES6010

Glazes for stoneware and porcelains
Temperature of firing : 1250-1300°C

Groupe I

Without lead

REFRACTORY GROG 0-0.5

Ref : CHAM005

COLOUR FREE LEAD CD26 GREY GREENISH

Grey greenish - CD26

Without lead

Firing temperature: 980-1280°C

Formula: Zr-Si-Ni-Co

COLOUR LEAD FREE CD02 BLUE COBALT

Blue cobalt-CD02

Without lead

Firing temperature: 980-1280°C

Formula: Co-Si

Stem 1400°C maximum L 300x4 mm - 4000003000

Alumina hydrate

Molar formula

Al2O3              

Molar mass = 102

Mini ribbon molding clay 11 cm - Set of 5 - 903

Conical sponge on wooden handle - 035HM001

smaller diameter 20 mm

L. 89 mm

Fine natural sponge appearance.

Glaze Bright transparent 0302

Temperature of firing : 1200-1270°C

Groupe I

Lavender blue 010295

Glazes for stonewares and porcelains.

Temperature of firing : 1250-1300°C

LIQUID GLAZE ETSP01L TRANSPARENT BRIGHT WITHOUTLEAD 250GR

Transparent liquid glaze - ETSP01L

250GR

Yellow flecked black PSE24

Advice:

Firing temperature : 980°C

Mentions :

GROUPE II

Presence of lead.

Wollastonite

WOLLA

Smooth white stoneware - FLAXEN00

White stoneware clay containing 3 to 4% cellulose fibre, smooth.

Gauge poste in cast aluminium with 2 arms rubber tip Ø 120 x H 370 mm - TRUSQ87

Arm 390 mm

Wheel Height Throwing Gauge

DOUBLE REFRACTORY METAL SUPPORT ROUND Ø 60 MM 1260°C

Double refractory support Ø 60 H 22 mm n°50-60

Ref : SUPDOU60

Double steel stilt Ø 60 H 22 mm n°50-60

DOUBLE REFRACTORY METAL SUPPORT ROUND Ø 100 MM 1200°C

Double refractory support Ø 100 H 22 mm n°50-100

Ref : SUPDOU100

Double steel stilt Ø 100 H 22 mm n°50-100

Silica ENS for setting

Ref : SICEPE

Glossy transparent enamel - PR233

Composed of Frit.

Glossy transparent enamel, lead free.

For glazing ceramic pottery pieces in red or white clay.

Firing temperature, between 950-1020ºC.

Glossy white enamel - PR 115

Composed of Frit.

High gloss Opaque White enamel, low expansion.

Can be used with excellent results on tiles or red earthenware as well as white majolica.

The firing temperature varies between 1000-1080ºC.

Kiln refractory round plates 1340 ° C max Ø 350 x 12 mm (3kg)

Fragile material, can not be sent by post.

PEPTAPON 5 Suspensive "tempered glaze"

Ref : PEP5

Red smooth modeling clay - MROUGE10

CUTTING TOOL L 220 MM N°15

Simple ribbon  tools L. 220 mm N°15 - MIR73

Simple ribbon  tools L. 220 mm N°16 - MIR50

Double ribbon  tools L. 265 mm N°13 - MIR48

Simple ribbon  tools L. 220 mm N°8 - MIR46

Electronic Potter's wheel "LITTLE FROG" model TY16

Potter's wheel for pottery initiation.

Power 380 W in 220 Volt monophase (usual plug)

GLAZE STONEWARE/PORCELAIN GEESP05 ANTHRACITE JASPE WITHOUT LEAD

Anthracite jaspe GEESP05

GROUPE I

Firing temperature: 1250-1300°C

Celadon green stoneware & porcelain engobe - EASP09

Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.

These engobes are available in liquid or powder.

At earthenware temperature, the colors will be more pastel than presented.

Tips /

Firing range 980 - 1280°C

Brush application, soaking or spraying.

Red stoneware & porcelain engobe - EASP06

Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.

These engobes are available in liquid or powder.

At earthenware temperature, the colors will be more pastel than presented.

Tips /

Firing range 980 - 1280°C

Brush application, soaking or spraying.

Stoneware & porcelain engobe base to color - EASP00

Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.

These engobes are available in liquid or powder.

At earthenware temperature, the colors will be more pastel than presented.

Tips:

Firing range 980 - 1280°C

Brush application, soaking or spraying.

DURCI'DUR® Red Classic Range - DDR10

Natural clay with hardener, for modeling that hardens to air without the need of firing.

Dries in 24-48h depending on the thickness to give realizations resistant to shocks.

European Standard Toys EN-71/3.

Don’t stain the hands.

Does not fire, does not enamel.

Available in several colours.

LEAD FOR 1400°C S TYPE THERMOCOUPLE THE LINEAR METER

Compensating cable shielded probe S type 1400 ° C - the ml

Ref : CABLTHER.14

White bisqueware tile pressed earthenware 300x200x7mm

Pack of 16 U.

REFRACTORY STAINLESS STEEL 1200 ° C L 200 x 2 MM FOR LIGHT OBJECT

Bar L 200x2 mm. For light pieces

REFRACTORY STAINLESS STEEL 1200 ° C
bar length 200 mm x diameter 2 mm.
Rod 1200 ° C maximum beyond a slight deformation appears
Ideal for baking beads and ceramic jewelry

ALUMINA STEM PURE 1400°C L200 X 4 MM

Hole cutter medium model Ø 8 mm - 537

Cylindrical sponge wood handle

Ref : 196R25HM

TOOLS PEAR TAPERED SPONGE STICK 35 MM L 89 MM

Sponge shaped drop of water wooden handle

Ref : 175LCHM0

Cracked opac white 06054

Glazes for stoneware and porcelains
Temperature of firing : 1250-1300°C